Binnen het projectonderwijs wordt nog vaak drooggezwommen. Enerzijds door de verstrekte projectopdrachten anderzijds door de suboptimalisatie van oplossingen. Deze zijn namelijk sterk afhankelijk van de verbonden modules en docenten. In de praktijk zijn de oplossingen echter altijd een afweging van tijd, geld en kwaliteit. Onze Human Engineers leren om daar op een goede manier mee om te gaan. Dit door de integratiemodule Integrated Product Development (IPD). IPD is een multidisciplinair project waarbij studenten van verschillende Fontys Instituten werken aan de commercikle en technische uitwerking van een bedrijfsopdracht. Marktonderzoek, doelgroep bepaling en productspecificatie zijn een vast onderdeel van een IPD project evenals het ontwerpen en bouwen van een prototype en het financieel onderbouwen van een Go/NO go advies aan de ondernemer. Het project vindt plaats in het laatste onderwijssemester, net vssr het afstuderen en is dus te zien als een open project met een bedrijf als opdrachtgever. De Human Engineering studenten zijn in deze projecten de verbindende schakel. De specialisten in de projectgroepen, de technische studenten, willen nogal eens zoeken naar mooie oplossingen vooral in technische zin. Daarbij gaan ze vaak volledig voorbij aan het belang van de ondernemer (winst maken) en het belang van de klant (kwaliteit en bedieningsgemak). Ook het projectwerk heeft een enorme sprong vooruit gemaakt door het team uit te breiden met Human Engineers. De Human Engineering studenten focussen vooral ook op het halen van targets (kosten) en deadlines (tijd), het maken en nakomen van afspraken en de communicatie binnen de groep en naar buiten toe (ondernemer en klant). Huidige studenten en alumni geven aan dat het project zeer realistisch is en dat het vergelijkbaar is met problemen die ze in hun werk tegen komen. Zeker blijven doen is hun advies. Organisatorisch vergt het wel een en ander omdat er bijvoorbeeld afstemming dient te komen tussen de verschillende instituten met betrekking tot: beoordeling van de studenten, afstemmen van lesroosters en vergoeding voor docenten. Ook het onderhouden van bedrijfsrelaties om bijvoorbeeld aan de opdrachten te komen blijft een moeilijke, tijdrovende zaak.
These are hard days for companies: they have to survive in a market that has been hit by a financial crisis. Many countries in Europe have severe problems trying to overcome this financial crisis. The main remedy applied by governments is to cut back on expenditure, but on the other hand it is said that it is important for a country, and especially for companies, to invest in innovation. These innovations should lead to innovative products that will lead to profitability turnovers for these companies and, as a consequence, improve the economic conditions in a country. Universities provide students with engineering competences, like develop innovation, with which they can show a higher degree of ability to answer complex questions such as how to become players in the market again. Teaching students to become more innovative engineers, Fontys University of Applied Sciences, Department of Engineering, has designed a curriculum in which students are educated in the competence innovation. An important element in the process of teaching innovation to students is the approach of inquiring into possibilities of patents. In the second semester of the first year, students can decide to join an innovative project called: ‘The invention project’. The basis of this project is that students are given the opportunity to create their own invention and with their previously acquired knowledge and skills they design, calculate, prototype and present their invention. In a research project, the experiences of students in this Invention Project have been analysed. The goal of this study was to understand what the success factors are for such a project. The basis of this inquiry is a questionnaire to identify the opinions of students. The research was carried out in the spring semester of 2012. In total 31 students were involved in this research. The results show that there was a high degree of student satisfaction about the Invention Project focused on innovation development. Success factors for this project in the first year of the curriculum were seen: 1 to work on own inventions, 2 development of student’s perception of the total product creation process and 3 to make students see the relevance of contacts with real professionals from industry and from the patent office in their own project. Improvements can be made by: 1 helping students more during the creativity stage in the project and 2 to coach them more on the aspect of engineering a successful invention of which they can be proud. This Invention project is a interesting with which collaborations with other universities can be set up.
The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in co-operation with the regional industry. The companies involved are sponsoring the developments and the revenue is being used for more intensive group coaching by tutors and specialists. We experimented with communication technology to find a good compromise between time and costs. It turned out that intelligent pagers resulted in minor improvements, mobile phones are still too expensive, e-mail is functional but creates no group cohesion and most of the com-panies are rather conservative in their use of new communication tools. We also found out that the use of a Computer Supported Co-operative Work (CSCW) server is a possibility for information interchange as an alternative for e-mail attachments. The server is also used as an archive. In future we expect that CSCW will be an effective tool for project sup-port and control.
Designing cities that are socially sustainable has been a significant challenge until today. Lately, European Commission’s research agenda of Industy 5.0 has prioritised a sustainable, human-centric and resilient development over merely pursuing efficiency and productivity in societal transitions. The focus has been on searching for sustainable solutions to societal challenges, engaging part of the design industry. In architecture and urban design, whose common goal is to create a condition for human life, much effort was put into elevating the engineering process of physical space, making it more efficient. However, the natural process of social evolution has not been given priority in urban and architectural research on sustainable design. STEPS stems from the common interest of the project partners in accessible, diverse, and progressive public spaces, which is vital to socially sustainable urban development. The primary challenge lies in how to synthesise the standardised sustainable design techniques with unique social values of public space, propelling a transition from technical sustainability to social sustainability. Although a large number of social-oriented studies in urban design have been published in the academic domain, principles and guidelines that can be applied to practice are large missing. How can we generate operative principles guiding public space analysis and design to explore and achieve the social condition of sustainability, developing transferable ways of utilising research knowledge in design? STEPS will develop a design catalogue with operative principles guiding public space analysis and design. This will help designers apply cross-domain knowledge of social sustainability in practice.
Recycling of plastics plays an important role to reach a climate neutral industry. To come to a sustainable circular use of materials, it is important that recycled plastics can be used for comparable (or ugraded) applications as their original use. QuinLyte innovated a material that can reach this goal. SmartAgain® is a material that is obtained by recycling of high-barrier multilayer films and which maintains its properties after mechanical recycling. It opens the door for many applications, of which the production of a scoliosis brace is a typical example from the medical field. Scoliosis is a sideways curvature of the spine and wearing an orthopedic brace is the common non-invasive treatment to reduce the likelihood of spinal fusion surgery later. The traditional way to make such brace is inaccurate, messy, time- and money-consuming. Because of its nearly unlimited design freedom, 3D FDM-printing is regarded as the ultimate sustainable technique for producing such brace. From a materials point of view, SmartAgain® has the good fit with the mechanical property requirements of scoliosis braces. However, its fast crystallization rate often plays against the FDM-printing process, for example can cause poor layer-layer adhesion. Only when this problem is solved, a reliable brace which is strong, tough, and light weight could be printed via FDM-printing. Zuyd University of Applied Science has, in close collaboration with Maastricht University, built thorough knowledge on tuning crystallization kinetics with the temperature development during printing, resulting in printed products with improved layer-layer adhesion. Because of this knowledge and experience on developing materials for 3D printing, QuinLyte contacted Zuyd to develop a strategy for printing a wearable scoliosis brace of SmartAgain®. In the future a range of other tailor-made products can be envisioned. Thus, the project is in line with the GoChem-themes: raw materials from recycling, 3D printing and upcycling.
Currently, many novel innovative materials and manufacturing methods are developed in order to help businesses for improving their performance, developing new products, and also implement more sustainability into their current processes. For this purpose, additive manufacturing (AM) technology has been very successful in the fabrication of complex shape products, that cannot be manufactured by conventional approaches, and also using novel high-performance materials with more sustainable aspects. The application of bioplastics and biopolymers is growing fast in the 3D printing industry. Since they are good alternatives to petrochemical products that have negative impacts on environments, therefore, many research studies have been exploring and developing new biopolymers and 3D printing techniques for the fabrication of fully biobased products. In particular, 3D printing of smart biopolymers has attracted much attention due to the specific functionalities of the fabricated products. They have a unique ability to recover their original shape from a significant plastic deformation when a particular stimulus, like temperature, is applied. Therefore, the application of smart biopolymers in the 3D printing process gives an additional dimension (time) to this technology, called four-dimensional (4D) printing, and it highlights the promise for further development of 4D printing in the design and fabrication of smart structures and products. This performance in combination with specific complex designs, such as sandwich structures, allows the production of for example impact-resistant, stress-absorber panels, lightweight products for sporting goods, automotive, or many other applications. In this study, an experimental approach will be applied to fabricate a suitable biopolymer with a shape memory behavior and also investigate the impact of design and operational parameters on the functionality of 4D printed sandwich structures, especially, stress absorption rate and shape recovery behavior.
