An efficient four-step biotransformation-mediated synthesis of (1S)-1-(2,6-dichloro-3-fluorophenyl)ethanol in enantiomerically pure form is described. This compound is a key intermediate required for the preparation of PF-2341066, a potent inhibitor of c-Met/ALK that is currently in clinical development. The described synthesis was used to manufacture 6 kg of the title compound and can also be employed to produce the corresponding (1R)-enantiomer. © 2010 Elsevier Ltd. All rights reserved.
Natural Deep Eutectic Solvents (NADES) represent a green chemistry alternative to utilization of common hazardous organic solvents. They were introduced by Abbott et al. [1], and were found to have a wide range of compositions and favorable properties. NADES are typically obtained by mixing hydrogen-bond acceptors (HBA), with hydrogen bond donors (HBD), leading to a significant depression of the melting point. The availability of components, simple preparation, biodegradability, safety, re usability and low cost are the significant advantages that call for research on their analytical applications. Three methods are most commonly used for preparing NADES: a) heating and stirring: the mixture until a clear liquid is formed; b) evaporating solvent from components solution with a rotatory evaporator; c) freeze drying of aqueous solutions.The common solvents for the extraction of anthocyanins are acidified mixtures of water with ethanol, methanol, or acetone. The anthocyanins extracts are susceptible to degradation due to high temperature, and the solvent properties (e.g. high pH) and the whole process can often be time-consuming. Extraction of anthocyanins from red cabbage by four NADES was investigated. It was demonstrated that NADES have comparable extraction efficiencies with conventional method with 0.1 M water solution of HCl. This indicates a possibility of utilization the Green chemistry extraction processes as a promising new green-extraction technology with low cost efficiency and environment friendly technology for production of safe food additives.
With a market demand for low cost, easy to produce, flexible and portable applications in healthcare, energy, biomedical or electronics markets, large research programs are initiated to develop new technologies to provide this demand with new innovative ideas. One of these fast developing technologies is organic printed electronics. As the term printed electronics implies, functional materials are printed via, e.g. inkjet, flexo or gravure printing techniques, on to a substrate material. Applications are, among others, organic light emitting diodes (OLED), sensors and Lab-on-a-chip devices. For all these applications, in some way, the interaction of fluids with the substrate is of great importance. The most used substrate materials for these low-cost devices are (coated) paper or plastic. Plastic substrates have a relatively low surface energy which frequently leads to poor wetting and/or poor adhesion of the fluids on the substrates during printing and/ or post-processing. Plasma technology has had a long history in treating materials in order to improve wetting or promote adhesion. The µPlasma patterning tool described in this thesis combines a digital inkjet printing platform with an atmospheric dielectric barrier discharge plasma tool. Thus enabling selective and local plasma treatment, at atmospheric pressure, of substrates without the use of any masking materials. In this thesis, we show that dependent on the gas composition the substrate surface can either be functionalized, thus increasing its surface energy, or material can be deposited on the surface, lowering its surface energy. Through XPS and ATR-FTIR analysis of the treated (polymer) substrate surfaces, chemical modification of the surface structure was confirmed. The chemical modification and wetting properties of the treated substrates remained present for at least one month after storage. Localized changes in wettability through µPlasma patterning were obtained with a resolution of 300µm. Next to the control of wettability of an ink on a substrate in printed electronics is the interaction of ink droplets with themselves of importance. In printing applications, coalescence of droplets is standard practice as consecutive droplets are printed onto, or close to each other. Understanding the behaviour of these droplets upon coalescence is therefore important, especially when the ink droplets are of different composition and/or volume. For droplets of equal volume, it was found that dye transport across the coalescence bridge could be fully described by diffusion only. This is as expected, as due to the droplet symmetry on either side of the bridge, the convective flows towards the bridge are of equal size but opposite in direction. For droplets of unequal volume, the symmetry across the bridge is no longer present. Experimental analysis of these merging droplets show that in the early stages of coalescence a convective flow from the small to large droplet is present. Also, a smaller convective flow of shorter duration from the large into the small droplet was identified. The origin of this flow might be due to the presence of vortices along the interface of the bridge, due to the strong transverse flow to open the bridge. To conclude, three potential applications were showcased. In the first application we used µPlasma patterning to create hydrophilic patterns on hydrophobic dodecyl-trichlorosilane (DTS) covered glass. Capillaries for a Lab-on-a-chip device were successfully created by placing two µPlasma patterned glass slides on top of each other separated by scotch tape. In the second application we showcased the production of a RFID tag via inkjet printing. Functional RFID-tags on paper were created via inkjet printing of silver nanoparticle ink connected to an integrated circuit. The optimal operating frequency of the produced tags is in the range of 860-865 MHz, making them usable for the European market, although the small working range of 1 m needs further improvement. Lastly, we showed the production of a chemresistor based gas sensor. In house synthesised polyemeraldine salt (PANi) was coated by hand on top of inkjet printed silver electrodes. The sensor proved to be equally sensitive to ethanol and water vapour, reducing its selectivity in detecting changes in gas composition.
Micro and macro algae are a rich source of lipids, proteins and carbohydrates, but also of secondary metabolites like phytosterols. Phytosterols have important health effects such as prevention of cardiovascular diseases. Global phytosterol market size was estimated at USD 709.7 million in 2019 and is expected to grow with a CAGR of 8.7% until 2027. Growing adoption of healthy lifestyle has bolstered demand for nutraceutical products. This is expected to be a major factor driving demand for phytosterols.Residues from algae are found in algae farming and processing, are found as beachings and are pruning residues from underwater Giant Kelp forests. Large amounts of brown seaweed beaches in the province of Zeeland and are discarded as waste. Pruning residues from Giant Kelp Forests harvests for the Namibian coast provide large amounts of biomass. ALGOL project considers all these biomass residues as raw material for added value creation.The ALGOL feasibility project will develop and evaluate green technologies for phytosterol extraction from algae biomass in a biocascading approach. Fucosterol is chosen because of its high added value, whereas lipids, protein and carbohydrates are lower in value and will hence be evaluated in follow-up projects. ALGOL will develop subcritical water, supercritical CO2 with modifiers and ethanol extraction technologies and compare these with conventional petroleum-based extractions and asses its technical, economic and environmental feasibility. Prototype nutraceutical/cosmeceutical products will be developed to demonstrate possible applications with fucosterol.A network of Dutch and African partners will supply micro and macro algae biomass, evaluate developed technologies and will prototype products with it, which are relevant to their own business interests. ALGOL project will create added value by taking a biocascading approach where first high-interest components are processed into high added value products as nutraceutical or cosmeceutical.
Micro and macro algae are a rich source of lipids, proteins and carbohydrates, but also of secondary metabolites like phytosterols. Phytosterols have important health effects such as prevention of cardiovascular diseases. Global phytosterol market size was estimated at USD 709.7 million in 2019 and is expected to grow with a CAGR of 8.7% until 2027. Growing adoption of healthy lifestyle has bolstered demand for nutraceutical products. This is expected to be a major factor driving demand for phytosterols. Residues from algae are found in algae farming and processing, are found as beachings and are pruning residues from underwater Giant Kelp forests. Large amounts of brown seaweed beaches in the province of Zeeland and are discarded as waste. Pruning residues from Giant Kelp Forests harvests for the Namibian coast provide large amounts of biomass. ALGOL project considers all these biomass residues as raw material for added value creation. The ALGOL feasibility project will develop and evaluate green technologies for phytosterol extraction from algae biomass in a biocascading approach. Fucosterol is chosen because of its high added value, whereas lipids, protein and carbohydrates are lower in value and will hence be evaluated in follow-up projects. ALGOL will develop subcritical water, supercritical CO2 with modifiers and ethanol extraction technologies and compare these with conventional petroleum-based extractions and asses its technical, economic and environmental feasibility. Prototype nutraceutical/cosmeceutical products will be developed to demonstrate possible applications with fucosterol. A network of Dutch and African partners will supply micro and macro algae biomass, evaluate developed technologies and will prototype products with it, which are relevant to their own business interests. ALGOL project will create added value by taking a biocascading approach where first high-interest components are processed into high added value products as nutraceutical or cosmeceutical.
Dit KIEM-VANG project gaat een bijdrage leveren aan het verwerken en beter verwaarden van heterogene biotische afvalstromen zoals restaurantafval. Voor een dergelijke afvalstroom is verwaarden van individuele componenten problematisch en de stroom wordt daarom doorgaans door vergisting omgezet in biogas. Een vloeibare energiedrager als methanol zou hanteerbaarder en attractiever zijn, bijvoorbeeld voor opslag. Bovendien is methanol één van de belangrijkste platformchemicaliën voor de chemische industrie. Methanol wordt nu gemaakt uit aardgas in een duur en complex proces. Dit project beoogt de haalbaarheid van een alternatieve route van biogas naar methanol te onderzoeken: omzetting van biogas naar methanol in een biologische route. De biologische productie van methanol uit biogas draagt bij aan het verminderen van het gebruik van fossiele bronnen en broeikasgasemissies, creëert een nieuwe kringloop van biotisch afval naar hernieuwbare chemische synthese en is potentieel decentraal en kleinschalig toe te passen. Kleinschaligheid impliceert decentrale productie en opslag, vergemakkelijkt de logistiek, vermindert benodigde investeringen en verhoogt tevens de zichtbaarheid voor en daarmee de acceptatie door het grote publiek. Het onderzoek richt zich met literatuurstudie, virtueel prototyping en laboratoriumtesten op de technologische (biologische en/of chemische) parameters die de efficiënte productie van methanol uit biogas bepalen, met aandacht voor katalysatoren, (kunstmatige) enzymen en microbiële omzetting, resulterend in het conceptontwerp van een grote installatie. Daarnaast wordt de economische haalbaarheid en duurzaamheid van biologische methanolproductie onderzocht en vergeleken met bestaande alternatieven in een adaptief rekenmodel met het oog op duurzame inpassing in (kleinschalige) biogasketens. De samenwerkende MKB’s Enki Energie en Physixfactor zien kansen met dit idee hun marktpositie in kleinschalige duurzame energie (Enki) en het doorrekenen van innovatieve installaties (Physixfactor) uit te breiden. Samen met de kennisinstelling Hanze University of Applied Sciences Groningen is een goede aanzet te geven tot een groter vervolgproject met een groter kennisnetwerk van belang en belangstelling hebbende bedrijven en kennisinstellingen.
