Search results

Sizing Batteries for Power Flow Management in Distribution Grids

Battery energy storage (BES) can provide many grid services, such as power flow management to reduce distribution grid overloading. It is desirable to minimise BES storage capacities to reduce investment costs. However, it is not always clear how battery sizing is affected by battery siting and power flow simultaneity (PFS). This paper describes a method to compare the battery capacity required to provide grid services for different battery siting configurations and variable PFSs. The method was implemented by modelling a standard test grid with artificial power flow patterns and different battery siting configurations. The storage capacity of each configuration was minimised to determine how these variables affect the minimum storage capacity required to maintain power flows below a given threshold. In this case, a battery located at the transformer required 10–20% more capacity than a battery located centrally on the grid, or several batteries distributed throughout the grid, depending on PFS. The differences in capacity requirements were largely attributed to the ability of a BES configuration to mitigate network losses. The method presented in this paper can be used to compare BES capacity requirements for different battery siting configurations, power flow patterns, grid services, and grid characteristics.

Direct current in public lighting for improvement in LED performance and costs

Public lighting’s primary purpose is nighttime visibility for security and safety. How to meet so many requirements of so many stakeholders? The key to developing a good plan is to relate lighting to functions of public spaces, because street lighting is more than a technical requirement, a security need, or a design element. It can be thought of and utilized in terms of how the type, placement, and wattage affect how a street is perceived and used. With present-day used street lighting systems however, flexibility is expensive, as is maintenance and energy consumption. A new solution is to use LED lighting with a Direct Current power system. Advantages are a decrease in: energy conversions; material use; amount of switch- boxes; components; labour costs and environmental comfort. The overall implementation of LED and DC will result in better control and efficient maintenance due to integrated bidirectional communication. A challenge is the relatively high investment for these new solutions. Another challenge; DC is not a standard yet in rules and regulations. In the paper the transition to direct current public lighting system will be described with all the pros and cons. A new concept of public ownership, to overcome financial challenges will be discussed. M Hulsebosch1, P Willigenburg2 ,J Woudstra2 and B Groenewald3 1CityTec b.v., Alblasserdam, The Netherlands 2The Hague University of Applied Sciences, The Hague, The Netherlands 3Cape Peninsula University of Technology, Cape Town, South Africa 10.1109/ICUE.2014.6904186

Nul op de Trafo Analysis

The neighborhood of Houtlaan in Assen, the Netherlands, has ambitious targets for reducing the neighborhood’scarbon emissions and increasing their production of their own, sustainable energy. Specifically, they wish toincrease the percentage of houses with a heat pump, electric vehicle (EV) and solar panels (PV) to 60%, 70%and 80%, respectively, by the year 2030. However, it was unclear what the impacts of this transition would be onthe electricity grid, and what limitations or problems might be encountered along the way.Therefore, a study was carried out to model the future energy load and production patterns in Houtlaan. Thepurpose of the model was to identify and quantify the problems which could be encountered if no steps are takento prevent these problems. In addition, the model was used to simulate the effectiveness of various proposedsolutions to reduce or eliminate the problems which were identified.

The City as Black Box: Navigating Through the Surplus of Information

Facilitating circular site preparation; developing the instrument PrCiSi

The impact of the construction industry on the natural environment is severe, natural areas are changedinto predominantly hard solid surfaces, the energy use in the built environment is high and the industryputs huge claims on materials

Hamburg Workshop results: MSP Challenge Baltic Sea edition