Sustainable production of aromatics, especially benzene, toluene and xylenes (BTX), is essential considering their broad applications and the current global transition away from crude oil utilization. Aromatization of lower olefins, particularly ethene and propene, offers great potential if they are derived from more circular alternative carbon feedstocks such as biomass and waste plastics. This work aims to identify the preferred olefin feed, ethene or propene, for BTX production in a fixed-bed reactor. A commercial H-ZSM-5 (Si/Al = 23) catalyst was used as a reference catalyst, as well as a Ga-ZSM-5 catalyst, prepared by Ga ion-exchange of the H-ZSM-5 catalyst. At 773 K, 1 bar, 45 vol % olefin, 6.75 h−1, propene aromatization over the Ga-ZSM-5 catalyst exhibited higher BTX selectivity of 55 % and resulted in slower catalyst deactivation compared to ethene aromatization.
Several 2-nitroalkyl polysaccharide ethers (from pullulan (1), guar (2), agarose (3), inulin (4), cellulose (5), Na-α-polyglucuronate (6) and hydroxyethyl cellulose (7)) were synthesized by reaction with 2-nitro-1-alkenes (2-nitro-1-propene and 2-nitro-1-butene) formed in situ from 2-nitroalkyl acetates. Moderate to high efficiencies are obtained in concentrated aqueous solution/suspension for addition to 1-4 and 7. Analysis of this new class of polysaccharide derivatives with the aid of labeled 2-nitropropyl-2-13C pullulan revealed that the nitrogroup is a mixture of the nitroalkane and nitronic acid tautomers. Grafting of nitroalkenes is observed and, to a lesser extent, additional reactions of the nitro group (formation of carbonyl, oxime and allyl groups) take place. Reduction of 2-nitroalkyl polysaccharide ethers with Na2S2O4or Na2S2O4/NaBH4leads to complex polysaccharide ethers. The products obtained are most likely mixtures of starting material, nitroso compounds, hydroxylamines, hydroxypropyl ethers and sulfamates.
LINK
Granular starch was cross-linked with 1,3-di-O-acetyl-2-nitro-1,3-propanediol (1), 1,3-di-O-pivaloyl-2-nitro-1,3-propanediol (2), 2-nitro-3-O-pivaloyl-1-propene-3-ol (3), 1,3-di-O-acetyl-aci-2-nitro-1,3-propanediol (4), 1,3-di-O-pivaloyl-aci-2-nitro-1,3-propanediol (5) and 1,6-di-O-acetyl-2,5-dinitro-1,6-hexanediol (6). The bifunctional precursors for the nitro-alkenes 1, 2, 3, and 4 were readily synthesized in high yields from nitromethane, paraformaldehyde and acetic anhydride (1, 3) or pivaloyl chloride (2, 4), respectively. The reaction rate for the cross-linking was very high, and for 1 and 3, the reaction reached completion within 1 h (at room temperature). The swelling capacities of the products obtained when starch was cross-linked with precursors for the nitroalkenes 1-4 and 6 were lower in comparison to epichlorohydrin cross-linked starch. These results indicate a high reaction efficiency at low degrees of substitution. Cross-linked 2-nitroalkyl starch ethers were synthesized in a one-pot synthesis by addition of 1 or 3 and 2-nitroalkyl acetates to granular suspensions of starch. Copyright (C) 1998 Elsevier Science Ltd.
