Masonry structures comprise a significant portion of the historical building stock all over the world. Previousstudies have clearly pointed out that unreinforced masonry buildings are vulnerable against extreme loadingconditions, such as seismic actions. Therefore, strengthening is inevitable in most cases for historical masonry towithstand severe loads. In this paper, the efficiency of fabric reinforced cementitious matrix is investigatedexperimentally by using diagonal tension tests. Fourteen wallets with a nominal size of 750x750x235 mm wereproduced with using solid clay bricks and a low-strength mortar. The bricks were collected from the structuralwalls of an early-20th century building under restoration. The low-strength mortar represents the historicalmortar commonly used in similar historical brick masonry buildings located in Istanbul, Turkey. By testing thespecimens under monotonic diagonal compression loads, the effects of different types of plasters on the walletsurface, varying types of fibers used in textile reinforcement and anchors used for the connection between FRCMand substrate are investigated. Although the wallet samples have inherent shortcomings in representing overallcomponent response accurately, still the qualitative findings are enlightening the effectiveness of the FRCMsystem by increasing shear strength, stiffness (shear modulus) and dissipated energy of the masonry wallets. Thestrengthened specimens were failed due to shear sliding along a bed joint and/or by a stair-shaped separationwhile the refence specimens were failed due to the splitting of the specimen into two parts in the stair-steppedshape and a slipping through a bed joint.
LINK
Coupling beams between shear walls are one of the key elements for energy dissipation in tall buildings. A representative mathematical model of coupling beam should represent flexure, shear and interface slip/extension mechanisms simultaneously. This goal can be achieved by using either detailed finite element models or by using macro models. This paper presents a review of various macro model alternatives for diagonally reinforced coupling beams in the literature. Three distinct methods have been reviewed in terms of their modeling techniques, the cyclic response overlap and the amount of cumulative plastic energy dissipated based on the results of previously performed tests. Through an analytical study, adequately accurate results can be captured by using macro models, although they are simpler in practice compared to sophisticated micro models. This study shows that, by modifying ultimate shear capacities where concrete material between diagonal bundles is adequately confined, it is possible to capture a more realistic result and a better approximation to the actual responses. It is also concluded that a simpler numerical model for diagonally reinforced coupling beams can be achieved by introducing linear part of slip/extension behavior into elastic part of the beam. It is observed, as a result of this study, that the ratio of effective stiffness to that of the gross cross-sectional one ranges from 0.04 to 0.14 in diagonally reinforced coupling beams depending on the aspect ratio and the beam strength parameters.
LINK
