Glycerol is an attractive bio-based platform chemical that can be converted to a variety of bio-based chemicals. We here report a catalytic co-conversion strategy where glycerol in combination with a second (bio-)feed (fatty acids, alcohols, alkanes) is used for the production of bio-based aromatics (BTX). Experiments were performed in a fixed bed reactor (10 g catalyst loading and WHSV of (co-)feed of 1 h-1) at 550 °C using a technical H-ZSM-5/Al2O3 catalyst. Synergistic effects of the co-feeding on the peak BTX carbon yield, product selectivity, total BTX productivity, catalyst life-time, and catalyst regenerability were observed and quantified. Best results were obtained for the co-conversion of glycerol and oleic acid (45/55 wt%), showing a peak BTX carbon yield of 26.7 C%. The distribution of C and H of the individual co-feeds in the BTX product was investigated using an integrated fast pyrolysis-GC-Orbitrap MS unit, showing that the aromatics are formed from both glycerol and the co-feed. The results of this study may be used to develop optimized co-feeding strategies for BTX formation. This journal is
The catalytic conversion of glycerol to aromatics (GTA, e.g., benzene, toluene, and xylenes, BTX) over a shaped H-ZSM-5/Al2O3 (60/40 wt%) catalyst was investigated in a continuous fixed-bed reactor to study the addition of the Al2O3 binder in the catalyst formulation on catalyst performance. The experiments were performed under N2 at 550 °C, a WHSV of glycerol (pure) of 1 h−1, and atmospheric pressure. The spent H-ZSM-5/Al2O3 catalysts were reused after an oxidative regeneration at 680 °C and in total 5 reaction-regeneration cycles were performed. Catalyst characterization studies show that the addition of the Al2O3 binder does not affect the surface area and crystallinity of the formulation, but increases the total pore volume (mesopores in particular) and total acidity (Lewis acidity in particular). The H-ZSM-5/Al2O3 (60/40 wt%) catalyst shows a considerably prolonged catalyst life-time (8.5 vs. 6.5 h for H-ZSM-5), resulting in a significant increase in the total BTX productivity (710 vs. 556 mg g−1 H-ZSM-5). Besides, the addition of the Al2O3 binder retards irreversible deactivation. For instance, after 3 regenerations, catalyst performance is comparable to the fresh one. However, after 4 regenerations, some irreversible catalyst deactivation occurs, associated with a reduction in total pore volume, crystallinity, and acidity (Brønsted acidity in particular), and meso-porosity of the Al2O3 binder. This study shows that both the stability and reusability of H-ZSM-5-based catalysts for GTA are remarkably enhanced when using a suitable binder.
A time- and space-resolved deactivation study on the conversion of glycerol to aromatics over H-ZSM-5 was performed. For this purpose, glycerol was vaporized/pyrolyzed in a pyrolysis section followed by a catalytic aromatization step. Benchmark performance showed an induction period of ca. 20 min, followed by a rather constant BTX yield of ca. 25.4 ± 2.2C.% for 3–4 h time on stream (TOS). Subsequently, a rapid drop in BTX yield was observed due to catalyst deactivation. Severe coking leads to coverage of catalyst surface area and blockage of micropores, particularly at the entrance of the catalyst bed at short TOS, indicating the presence of an axial coke gradient in the fixed bed reactor. At longer TOS, coke was formed throughout the bed and negligible BTX yield was shown to be associated with the presence of coke at all bed positions. Besides coking, the acidity of the catalyst was also reduced, and dealumination occurred, both with a similar time–space evolution. The results were explained by a conversion-zone migration model, which includes a deactivation zone (with severely coked catalyst), a conversion zone (BTX formation), and an induction zone (a.o. (de-)alkylation reactions), and describes the time- and space-resolved evolution of coking and relevant changes in other catalyst characteristics.
Paper sludge contains papermaking mineral additives and fibers, which could be reused or recycled, thus enhancing the circularity. One of the promising technologies is the fast pyrolysis of paper sludge, which is capable of recovering > 99 wt.% of the fine minerals in the paper sludge and also affording a bio-liquid. The fine minerals (e.g., ‘circular’ CaCO3) can be reused as filler in consumer products thereby reducing the required primary resources. However, the bio-liquid has a lower quality compared to fossil fuels, and only a limited application, e.g., for heat generation, has been applied. This could be significantly improved by catalytic upgrading of the fast pyrolysis vapor, known as an ex-situ catalytic pyrolysis approach. We have recently found that a high-quality bio-oil (mainly ‘bio-based’ paraffins and low-molecular-weight aromatics, carbon yield of 21%, and HHV of 41.1 MJ kg-1) was produced (Chem. Eng. J., 420 (2021), 129714). Nevertheless, catalyst deactivation occurred after a few hours’ of reaction. As such, catalyst stability and regenerability are of research interest and also of high relevance for industrial implementation. This project aims to study the potential of the add-on catalytic upgrading step to the industrial fast pyrolysis of paper sludge process. One important performance metric for sustainable catalysis in the industry is the level of catalyst consumption (kgcat tprod-1) for catalytic pyrolysis of paper sludge. Another important research topic is to establish the correlation between yield and selectivity of the bio-chemicals and the catalyst characteristics. For this, different types of catalysts (e.g., FCC-type E-Cat) will be tested and several reaction-regeneration cycles will be performed. These studies will determine under which conditions catalytic fast pyrolysis of paper sludge is technically and economically viable.
Epoxy thermosets are extensively used as coatings, adhesives and in structural applications as they typically impart outstanding mechanical and electrical properties as well as chemical resistance. The currently used epoxy thermosets are produced from fossil-based non-recyclable materials. To be able to meet the circularity and sustainability goals set by the EU, this needs to change. Biobased epoxy thermosets from residual streams are considered a promising and urgently needed alternative to regular epoxy thermosets. The Cashew Nut industry could play a significant role in the development of these biobased epoxy thermosets. Global cashew nut production is about 4 million tons/year. The cashew nutshell is currently discarded as waste or used as an inefficient fuel, creating environmental issues. The cashew nutshell contains Cashew Nutshell Liquid (CNSL), which consists of the valuable chemical component cardanol. Cardanol can be used to produce biobased epoxy thermosets with balanced rigid-flexible performance. However, systematic studies about the production, properties, recyclability and commercial opportunities of the cardanol based epoxy thermosets are lacking. In this project consortium partners Avans, RUAS, Maastricht University, TU/e, Nuts2, Charcotec, NPSP, SABA, and Prokol jointly aim to answer the question: How can we develop sustainable and economically viable biobased epoxy thermosets and composites from cashew nutshell residue? First the pyrolysis process will be optimized for the effective production of CNSL. Next, the cardanol in the CNSL will be purified and modified to make the recyclable biobased epoxy thermoset. Finally, by adding biocarbon (which is also produced during the pyrolysis of cashew nutshell) to the biobased epoxy thermoset, a composite with enhanced mechanical, electrical, and thermal properties is expected to be obtained. The success of this project serves as a catalyst for the development of sustainable solutions in the thermoset industry and contribute to a sustainable application of cashew nut residue.
